Two Terrains(1)

  • Two Terrains

    Grade:

    Some vehicles fly down the highway, while others are dirt-track specialists. This activity allows you to explore the relationships between, distance, rate, and time. Can you identify the best path for a vehicle? Try to predict what will happen if you set on‑road or off‑road performance measures.

    Activity

    Instructions

    The Display 

    • For each car, the distance is displayed on the top, the raceway below that, the elapsed time to the left, and the speed at the bottom.
    • Throughout on-road measures are displayed in red, and off-road measures are displayed in blue. For elapsed time, total elapsed time (on-road + off-road) is displayed in yellow.
    • Choose your mode at the bottom left of the tool. Manual Mode allows you to set distances and speeds. Random Mode restricts certain measures depending on the setting chosen.

    Setting distance

    • You can set ON-Road Distance by dragging the yellow dot left or right. The OFF-Road Distance is the distance from the yellow dot to the destination.
    • Alternatively, you can set either distance by entering values in the top boxes. ON-Road Distance must be less than or equal to 10 mi, and OFF-Road Distance must be greater than or equal to 10 mi.

    Setting speed

    • Set the ON-Road Speed and the OFF-Road Speed by moving the green slider below the respective speedometer.
    • Alternatively, you can set speed by entering values in the boxes. Speed must be a value between 0 and 120.

    After adjusting your settings, click the GO button to start the race. The winning total elapsed time (in yellow) will flash.

    Random Mode 

    • If you choose one of the three speed settings, then the speeds will be randomly chosen according to the choice you make. You can still change distances.
    • If you choose one of the two distance settings, then the distances will be randomly chosen according to the choice you make. You can still change speeds.
    • Before or after you choose the simulation, you can choose new random values by clicking the New button on the bottom, right.